PSK-CUP
PSK-CUP is multipurpose system used as the shuttering support for monolithic and composite house building, at bridges construction, industrial and civil objects.
The PSK-CUP slab formwork is a spatial structure that forms a rigid, hingeless frame, which in most cases does not require additional stabilization by diagonal connections. The system is certified and approved for use as a slab formwork and scaffolding during facade work.
The use of the PSK-CUP system makes it possible to concrete floors of various types: flat beamless floors, beam floors, floors with capitals, caissons, as well as inclined slabs. Wooden I-beams are used to transfer forces from the floor slab to the PSK-CUP structure.
The main material for the manufacture of vertical and horizontal elements is an electric-welded steel pipe 48x3mm. The lower threaded jack and the upper threaded forks are galvanized. A set of only five items allows you to assemble structures of different types and heights. The system can be additionally equipped with fixing elements to the building structure, flights of stairs and safety elements.
Vertical elements are the basic bearing components of the framework on vertical plane. There are six standard sizes from 500mm to 3000mm in 500mm increments. They are joined with the help of connection elements according to the principle “tube-in-tube”. In every 500 mm the vertical elements have welded cup connections – “bottom cup” produced from the high-quality steel, with the attached mobile cups – “upper cup” produced from ductile casting. They provide fixation from two to four horizontal elements. The bottom cup of the vertical element is 80 mm from the base.
Horizontal elements provide the framework rigidity. They have the forged tips in the form of feathers, identical to the bottom and upper cups, with minimal extension in order to avoid damage. Every tip is attached to the vertical element with the help of cup connection. There are 11 sizes of horizontal elements from 500mm to 3000mm in 250mm increments. The length and increments of the installation of horizontal elements is determined on the basis of strength and stability calculations.
Calculated weight of PSK-CUP elements:
PSK-TOP
This formwork system is suitable for horizontal, inclined and horizontal monolithic concrete and reinforced concrete structures. System – collapsible, multi-purpose, inventory, steel. It meets the requirements of class 1 accuracy. All elements are produced on modern robotic equipment in PSK Formwork Factory
- The maximum height of the tower assembly – 12,3 m.
- Maximum load-bearing capacity – 44.3 kN.
- PSK-Top system provides the possibility of rapid installation in vertical and horizontal position.
- Guaranteed corrosion protection – powder-coated, hot-dip galvanizing.
- Quick installation is guaranteed due to low weight of the individual elements
- Base Frame: 17 kg / Drilling Frame: 7 kg.
- Convenient packaging elements facilitates the logistics and delivery of any volumes of formwork
- The system is ideal for use in complex structures, including bridges and stadiums
PSK-Top can be used for big heights and high loads: safe load transfer to the ground
Staple Tower PSK-TOP consists of only 5 elements. In some cases, PSK-Top Stacking Tower can work without diagonals, then only 4 elements are enough.
Easy and simple assembly without bolts or pins – without any tools at all. The stacking frame weighs less than 7 kg which facilitates ergonomic and fast assembly.
Due to accessories preparation will not be carried out and the tower can be installed by a single worker, time and labour force are saved.
Completely Russian production ensures low cost and high quality steel.
PSK-Top is the efficient shoring system with few system parts.
After installation towers can be transported by crane.
System is dipping painted and also hot dip galvanizing is possible upon request.
In case of transporting with crane, for security, base-head spindles are fixed to scaffold system and desired rigidity is sustained with diagonal components.
PSK-DESK
The best solution for big areas scaffolding. The slabs formwork on the desk helps to speed up the working process. Thanks to universal elements it can be used for different requirements at the construction site. The main components of the system are props.
The main technical features of telescopic racks:
- working ranges height along allow tying-in to projects of any complexity
- tower load carrying capacity can vary from 1 up to 3 tons
- foundation nut is made of wrought iron recommended by European institutions for use at high shock loads in construction
Shuttering telescopic racks are designed to support horizontal shuttering liners when casting bridgings and use as temporary supports for fixing the horizontal elements during mounting and dismantling of various structures.
All products are subject to strict technical inspection and mechanical strength tests in the certification system of Russian GosStandart.
Set of different height along supporting telescopic racks allows performing in situ concrete works at any heights of up to 5.3 m. The main factor, indicating the rack quality and workability, is time and customer satisfaction reviews.
Constant customer feedback allows maintaining high quality and responding to market demands flexibly.
This suggests that our racks are the flagship at Russian construction market both in quality/price ratio and on service life